News

Working mode PLC: PLC adopts a cyclic scanning working mode. It is like a staff member who follows the routine, strictly following the fixed order of input sampling, program execution, and output refresh. In a scanning cycle, it will first collect and store the status of all input signals, then execute the program written by […]

Here are a few aspects to start with when evaluating the quality and reliability of PLC (Programmable Logic Controller) modules: Hardware Component Quality Chips and Electronic Components: Check the brand and quality level of key components such as microprocessors, memory chips, and power management chips used in PLC modules. Well-known brand chips are usually more

Determination of rated current Calculate the total load current: First, the rated current of all devices in the PLC control cabinet (including the PLC module itself, power module, input/output devices such as sensors and actuators, etc.) must be counted in detail. Add these current values ​​to get the total load current. For some devices that

Relay output type PLC contact failure case Case description: There is a PLC system that controls an industrial production line, which is used to control the start and stop of multiple motors. The contactor of one of the motors cannot be properly attracted, but the output indicator of the PLC is on. Troubleshooting process: First,

The device cannot start or stop normally Start failure: When the PLC output wiring has a circuit break, such as the output wiring connecting the motor start contactor coil is disconnected, even if the PLC program logic has issued a start command, the motor cannot receive the start signal and cannot start normally. This situation

The following is an example of a detailed technical document about a PLC control system: PLC Control System Technical Document System Overview This PLC control system is designed to achieve automated control of [specific industrial production process or equipment name]. By collecting and processing various input signals and controlling output signals, the entire system is

To select a frequency conversion control cabinet suitable for the automation system, the following factors need to be considered comprehensively: Load type Constant torque load: such as conveyor belts, cranes, etc. For this type of load, a frequency converter with good torque characteristics should be selected, which can output stable torque in the entire range

In today’s industrial automation control field, PLC (Programmable Logic Controller) plays a vital role. It is widely used in production line control, robot control, logistics system, environmental monitoring and process control. For example, in the automobile manufacturing industry, PLC can accurately control each link on the production line to ensure high-quality production of automobiles; in

In the field of industrial automation control, the combination of PLC (Programmable Logic Controller) and frequency converter is widely used. There are three main ways to connect them: 1. Analog connection Analog connection is a common connection method. PLC outputs analog signals to the inverter through analog output modules, such as 0-10V or 4-20mA voltage

PLC (Programmable Logic Controller) and DCS (Distributed Control System) are both commonly used technologies in industrial automation control systems. The following is an introduction to their characteristics, application scenarios, etc.: Basic concepts: PLC: A digital arithmetic unit designed for use in industrial environments. It uses programmable memory to store user programs, execute user-oriented instructions such